FulaSeal 770 Sanitary is specially designed for use in wet areas

FulaSeal 770 Sanitary is specifically designed for use in wet areas and contains a mould and mildew inhibitor. FulaSeal 770 Sanitary is suitable for contact with aluminium shower screens.

Key Benefits

  • Primerless adhesion to the widest range of surfaces
  • Contains fungicide that resists mould and mildew
  • Permanently flexible: +/- 25% joint movement capability
  • Neutral cure – will not corrode metal or concrete
  • Strong adhesion
  • Sealing around showers
  • Sealing inside bath tubs
  • Sealing around sinks
  • Sealing in laundries
  • Sealing and weather proofing sanitary ware and spas
  • Suitable for wet areas

All surfaces must be clean, dry, sound and free from dust, oil, old sealant or other contamination. For best results wipe all surfaces with Isopropyl Alcohol (IPA), using a lint free cloth. Adhesion to metals can be further improved by light sanding.

Application: Mask either side of joint to produce a neat finish. Cut tip off cartridge, fit nozzle, load into H.B. Fuller caulking gun and trim nozzle to desired size.

Gently squeeze trigger to dispense and push sealant into joint to ensure complete filling. Within 5 minutes of application, finish surface with wet spatula or other smooth implement. Remove any masking tape before the sealant skins.