Suburban SW4DERA Hot Water System - 15 Litre - Gas/Electric - White or Black- Supply and Fit

Supply and Fit- an extra cost may be incurred due to a gas fitter being needed.

This Suburban is a Gas / Electric water heater and has been WaterMark certified for the Australian market. The Suburban range of water heaters include Gas, 240v & Gas/Electric models and offer manual or 12v Ignition. Manufactured in the USA featuring a steel tank with porcelain lining for a extended life and copolymer insulation jacket for superior heat retention.

These hot water systems fit under a seat or in the back of a cupboard, with a door and access from the outside of the RV.

• All Suburban RV Hot Water Systems have a porcelain-lined, high tensile steel tank which are pressure tested twice for assurance of tank integrity and a long life.

  All Suburban RV Hot Water Systems have an anode rod which absorbs all the corrosive action of hot water. It is located on the bottom of HWS under the main burner, you simply unscrew this to drain the tank of water. If the rod is mostly eaten away, simply replace it with a new one.

   

• COMES IN BLACK AS WELL
  
• Easy access, Foam tank insulation and high recovery rate.
• Direct Spark ignition for gas and an Electric Element.
• Spare parts are available.
• 2 year warranty.
• Replaces Suburban SW4DEA
• Capacity: 15.1 litre
• Maximum / Minimum Working Pressure: 700 kPa / 150 kPa
• Heating Source: Universal Gas or 240 Volt
• Ignition Type: 12 Volt
• Recovery: 40Lt/hr 45 degree rise
• Dimensions (mm): (H)320 x (W)320 x (D)450 (plus pipe connections at rear)
• Includes door - Overall Dimensions 380mm x 380mm
• 240 volt - 50 HZ AC, 1440 watts - 6 amp.
• WaterMark Certified
• Gas Inlet 3/8 SAE
• Gas Consumption: 8.7 mj/h
• Cold water inlet is 1/2 inch female BSP.
• Hot water outlet is 1/2 inch female BSP.
• Anode Thread is 3/4 inch female NPT.
• Shipping Weight: 15.88 Kgs.
• Shipping Dimensions: 56 cm x 34 cm x 34 cm.